Regular cleaning keeps a firearm reliable and accurate and catches wear before it becomes a problem. Always confirm the firearm is unloaded, with no ammunition in the room, before you start.
What you need
- A cleaning rod or pull-through cord sized to your caliber or gauge
- Bore brushes and jags, plus patches that fit snugly
- A bore solvent for powder, copper or plastic fouling
- A lubricant or protectant oil
- A gun mat and a nylon brush for the action
A simple routine
- Run a solvent-wet patch through the bore from the chamber end when possible, and let it work.
- Scrub with a bore brush, then push dry patches until they come out clean.
- Wipe the action, bolt or slide and remove built-up residue.
- Apply a light coat of oil to metal surfaces and a drop where parts rub; wipe off the excess.
How often
Clean after every range session and after any hunt in rain, snow or saltwater spray. Moisture causes rust quickly, even on stainless steel.








